Skip to: Navigation | Content | Footer

Resources & manuals

Traffic control devices manual (TCD Manual) - Part 09: Level crossings

Published: 12 2008

This part of Traffic control devices manual (TCD Manual) describes the responsibilities for level crossings; risk assessment (ALCAM); and signs, markings and other design considerations for active or passive controls and for pedestrians, cycles, heavy motor vehicles.

Last updated: December 2008. This document ceases to be a controlled document when printed. Please refer to the current version at www.nzta.govt.nz

Last updated: December 2008.

Part 9: Level crossings

You can download the whole of Part 9: Level crossings (PDF, 1.59 MB), however we do not recommend storage of downloaded documents as changes may be made to these requirements without notice. This document ceases to be a controlled document when printed. Please refer to the online current version below.

  1. Introduction
  2. Responsibilities for level crossings
  3. Risk assessment/ALCAM
  4. Traffic signs
  5. Road marking
  6. Control devices
  7. Road geometry, surfacing and lighting
  8. Requirements for pedestrian and cycle level crossings
  9. Requirements for specific road vehicles
  10. Requirements for private level crossings
  11. Requirements for rail operations level crossings
  12. Requirements for tramway level crossings
  13. Definitions
  14. References

Appendix A: Standard sign and marking layouts

Appendix B: Sight distances at level crossings

Appendix C: Working on or near level crossings

Appendix D: Australian Level Crossing Assessment Model (ALCAM)